Sony ICF-C1iPMK2 Operating Instructions
![Sony ICF-C1iPMK2 manual cover](/images/06d87086e90fa63fc204ea67/thumbs/thumb175x175.webp)
To set the alarm, press and hold the ALARM SET A or ALARM SET B button until the alarm time flashes. Use the +/- buttons to set the desired time, and press the ALARM SET button again to confirm.
To adjust the brightness, press the SNOOZE/BRIGHTNESS button repeatedly until you reach the desired brightness level: high, medium, or low.
Ensure the iPod is securely connected and the adapter is compatible. Check if the iPod's battery is excessively low; it may need to charge for a few minutes before it turns on.
Press the RADIO/BAND button to toggle between AM and FM bands. Use the TUNING dial to select the desired station.
Press and hold the CLOCK button until the time flashes. Use the +/- buttons to adjust the time, and press the CLOCK button again to set it.
Extend the FM wire antenna fully and reposition it for better reception. For AM stations, try rotating the unit to find the best signal.
Check if the power cord is securely plugged in. Ensure that the unit has power by connecting it to a different outlet. If it still doesn't turn on, there might be an internal issue that requires service.
Yes, connect the auxiliary device to the AUDIO IN jack using an appropriate cable. Press the FUNCTION button to select the AUDIO IN mode.
To reset the unit, unplug it from the power source, wait a few seconds, and plug it back in. This should restore the default settings.
Yes, you can set different alarm sounds for ALARM A and ALARM B. While setting the alarm, choose between radio, buzzer, or iPod as your alarm sound.