Sony ICF-C112 Operating Instructions

To set the alarm, press and hold the ALARM button while adjusting the hour and minute using the TIME SET buttons. Release the ALARM button once the correct time is set.
The Sony ICF-C112 does not support changing the time display format. It is set to a 12-hour format by default.
Unplug the unit from the power source, wait for a few minutes, and then plug it back in. This should reset the device.
Extend the antenna fully and reposition the clock radio to improve reception. Avoid placing it near electronic devices that may cause interference.
Use the VOLUME dial on the side of the Sony ICF-C112 to adjust the alarm sound to your desired level.
Ensure that a 9V battery is installed in the battery compartment for backup power. This will maintain the time and alarm settings during a power outage.
Use a soft, dry cloth to clean the exterior of the clock radio. Avoid using any liquid cleaners or abrasive materials.
The Sony ICF-C112 supports FM frequencies from 87.5 MHz to 108 MHz and AM frequencies from 530 kHz to 1605 kHz.
The display brightness on the Sony ICF-C112 cannot be adjusted. It is set to a fixed brightness level.
Press and hold the CLOCK button while using the TIME SET buttons to adjust the hour and minute. Release the CLOCK button once the correct time is set.