Sony ICF-B200 Operating Instructions

To charge the Sony ICF-B200, turn the handle clockwise for manual charging or use the USB charging cable to connect it to a power source.
For better FM/AM reception, extend the antenna fully and adjust its position. Try to place the radio near a window or away from electronic devices that may cause interference.
To switch between FM and AM bands, use the band selector switch located on the side of the radio.
If the radio does not turn on, check if the battery is charged. Try charging the battery using the hand-crank or USB charging method. If it still doesn’t work, ensure the battery is properly inserted.
To use the flashlight, slide the flashlight switch located on the side of the radio to the ON position.
There is no dedicated reset button on the Sony ICF-B200. Turn the power off and back on, or remove and reinsert the battery to reset the device.
To maintain battery life, periodically charge the battery through hand-cranking or USB charging. Avoid leaving the radio in extremely hot or cold environments.
If the sound is distorted, check the volume level and adjust it to a moderate level. Ensure the antenna is fully extended for better reception.
To activate the emergency buzzer, press and hold the buzzer button. Release the button to stop the sound.
Yes, the Sony ICF-B200 can charge your phone using the USB output port. Connect your phone with a USB cable, and ensure the radio has sufficient charge.