Sony ICF-890 Operating Instructions

To set the alarm on your Sony ICF-890, press the "Alarm Set" button, use the tuning dial to select the desired time, and confirm by pressing the "Enter" button.
Ensure the antenna is fully extended and reposition the radio for better reception. Additionally, try to move the radio closer to a window and away from electronic devices that might cause interference.
To switch between AM and FM bands, press the "Band" button on your Sony ICF-890 until the desired band is displayed on the screen.
Check if the radio is connected to a power source or if the batteries are installed correctly. Replace the batteries if necessary.
Use the "Volume" knob located on the side of the Sony ICF-890 to increase or decrease the sound level.
To reset the Sony ICF-890 to factory settings, press and hold the "Reset" button located at the back of the unit using a pointed object until the display resets.
Yes, rechargeable batteries can be used, but ensure they are fully charged and compatible with the device specifications.
Press the "Sleep" button and use the tuning dial to select the desired duration. Confirm the selection by pressing the "Enter" button.
Check the power connection and ensure the batteries are installed correctly. If it still does not turn on, try using a different power outlet or replace the batteries.
Press and hold the "Time Set" button until the time begins to flash, then use the tuning dial to toggle between 12-hour and 24-hour formats. Confirm by pressing "Enter".