Sony ICF-350W Operating Instructions

To set the alarm, turn the "Alarm Set" knob to adjust the alarm time. Ensure the "Alarm" switch is set to "On" and choose between radio or buzzer for the alarm sound.
If the radio reception is poor, try extending the antenna fully and adjust its position. Relocating the radio to a different spot in the room can also help.
To change the time, press and hold the "Clock" button while turning the "Time Set" knob to adjust the hour and minute. Release the "Clock" button when done.
Check if the volume is turned up and ensure the radio is tuned to a station with a strong signal. Verify that the "Off/On" switch is set to "On".
Use a soft, dry cloth to gently wipe the exterior of the radio. Avoid using any harsh chemicals or abrasive materials that could damage the surface.
The Sony ICF-350W requires four AA batteries for operation. Ensure the batteries are inserted correctly following the polarity markings.
Yes, the Sony ICF-350W can be used as a bedside clock radio. It features an alarm function and a compact design suitable for bedside use.
To switch between AM and FM bands, use the "Band" switch located on the side of the radio. Slide it to the desired band.
Ensure the alarm time is set correctly and the alarm switch is on. Confirm that the volume is not set too low or the radio is not in "Off" mode.
No, the Sony ICF-350W operates solely on battery power. Ensure the batteries are fresh and properly installed for optimal performance.