Sony ICD-P17 Operating Instructions
![Sony ICD-P17 manual cover](/images/dff97f61df1003d45908ec0b/thumbs/thumb175x175.webp)
To transfer recordings, connect the ICD-P17 to your computer using a USB cable. The recorder will be recognized as a removable drive. Open the drive, locate your recordings, and copy them to your desired folder on your computer.
If your device won't turn on, check the batteries to ensure they are properly installed and have charge. Replace the batteries if necessary. If the problem persists, try resetting the device by removing the batteries for a few minutes and then reinserting them.
To extend battery life, use alkaline batteries, turn off the device when not in use, and use the lowest acceptable volume setting. Also, avoid using unnecessary features like the backlight for extended periods.
Yes, to delete a single file, locate the file using the device's menu, press the 'Erase' button, and confirm the deletion when prompted. Be cautious, as deleted files cannot be recovered.
To set the date and time, go to the menu and select 'Date & Time'. Use the navigation buttons to adjust the settings, and confirm each selection by pressing the 'Enter' button.
Recordings on the Sony ICD-P17 are saved in the LPEC format, a proprietary Sony format. You may need conversion software to play them on non-Sony devices.
Ensure the volume is turned up and the headphones or speaker are properly connected. Check if the 'Hold' function is activated, which might mute the sound. If problems persist, try resetting the device.
No, the Sony ICD-P17 does not support overwriting existing files. You must delete unwanted files to free up space before making new recordings.
The maximum recording time depends on the available memory and recording quality settings. At the lowest quality setting, the ICD-P17 can record up to approximately 300 hours.
To perform a factory reset, remove the batteries and leave the device off for at least 30 minutes. Reinsert the batteries and turn the device back on. Note that this will not delete your recordings but reset all settings to default.