Sony ICD-B120 Operating Instructions
![Sony ICD-B120 manual cover](/images/0eac2c141a69ace0ead76022/thumbs/thumb175x175.webp)
To start a new recording, press the 'REC' button on the device. Ensure the device is powered on and has sufficient memory available.
To delete a recording, navigate to the recording you wish to delete, press and hold the 'ERASE' button until 'ERASE?' appears on the screen, then press 'ERASE' again to confirm.
Ensure that the batteries are properly inserted and have sufficient charge. If the problem persists, try replacing the batteries.
Unfortunately, the Sony ICD-B120 does not support direct USB transfer. You will need to use an audio cable connected to your computer's microphone input and record the playback manually.
Ensure that the microphone is not obstructed and the recording environment is quiet. Try adjusting the microphone sensitivity in the settings.
To extend battery life, use high-quality alkaline batteries and turn off the device when not in use. Consider reducing the backlight duration in settings.
Yes, rechargeable batteries can be used. However, ensure they are fully charged before use and are of the correct type.
Press the 'DISPLAY' button while the device is stopped. The remaining recording time will be displayed on the screen.
Check if the microphone is blocked and if the device is in record mode. Also, ensure that the memory is not full.
To prevent accidental deletion, use the 'HOLD' function to lock the device’s buttons. This will prevent any accidental presses.