Sony ECM-719 Operating Instructions

To connect the Sony ECM-719 microphone to a recording device, plug the 3.5mm jack into the microphone input of your device. Ensure the connection is secure for optimal audio capture.
For interviews, position the ECM-719 microphone approximately 6-12 inches from the speaker's mouth, angled slightly upwards to capture clear audio while minimizing background noise.
To reduce wind noise, use a windscreen or foam cover over the ECM-719 microphone. This accessory helps to minimize the impact of wind interference on your recordings.
If your ECM-719 microphone is not picking up sound, check the connection to ensure it is plugged in securely. Also, verify that your recording device is set to the correct input source and the microphone's battery is functioning properly.
Regularly clean the ECM-719 microphone with a soft, dry cloth to remove dust and debris. Store it in a dry place to prevent moisture damage, and replace the battery as needed to ensure optimal performance.
To switch between omni and uni-directional modes on the ECM-719, use the selector switch located on the microphone body. Slide it to the desired position for the appropriate pickup pattern.
If the ECM-719 produces a humming noise, check for nearby electronic devices that might cause interference. Ensure the microphone cable is not damaged and try using a different recording device to isolate the issue.
Yes, you can use the ECM-719 with a computer. Connect the microphone to the computer's microphone input jack, and ensure the audio settings are configured to use the ECM-719 as the input source.
To replace the battery in the ECM-719, locate the battery compartment on the microphone body. Open it, remove the old battery, and insert a new LR44 battery. Ensure the battery is oriented correctly before closing the compartment.
The ECM-719 is compatible with most devices that have a 3.5mm microphone input. However, some devices may require an adapter or might not support external microphones. Check your device specifications for compatibility.