Sony DHC-MD555 Operating Instructions
![Sony DHC-MD555 manual cover](/images/76564085fb2b9fa2fd18cc6a/thumbs/thumb175x175.webp)
To set up your Sony DHC-MD555 for the first time, connect the speakers to the main unit, plug in the power cord, and follow the on-screen instructions to set the clock, radio stations, and any other initial settings.
If the CD tray won't open, ensure the unit is powered on, then press the eject button again. If it still doesn't open, turn off the unit, unplug it for a few minutes, and try again. If the problem persists, consult the manual or contact support.
To improve sound quality, adjust the equalizer settings to your preference, ensure the speakers are placed correctly, and check for any obstructions or interference that might affect sound clarity.
If the display shows "No Disc," check if the disc is inserted correctly, ensure it's clean and not damaged, and try playing a different disc to see if the issue persists.
To reset the Sony DHC-MD555 to factory settings, press and hold the STOP button and the POWER button simultaneously for a few seconds until the unit restarts and "RESET" appears on the display.
Yes, you can connect your smartphone to the Sony DHC-MD555 using an auxiliary cable. Simply plug one end into the headphone jack of your phone and the other into the AUX input on the stereo system.
If the remote control doesn't work, replace the batteries first. If it still doesn't function, ensure there are no obstacles between the remote and the unit, and try resetting the remote by removing the batteries and pressing all buttons to discharge any residual power.
To clean the tape heads, open the cassette compartment and gently wipe the heads with a cotton swab moistened with isopropyl alcohol. Allow them to dry completely before using the cassette deck again.
Yes, to record from the radio to a cassette, insert a blank cassette tape, tune to the desired radio station, and press the RECORD and PLAY buttons simultaneously on the cassette deck.
To adjust the clock, press the CLOCK/TIMER button, use the arrow keys to set the current time, and press ENTER to confirm. Make sure the unit is in standby mode while setting the clock.