Sony DAV-TZ130 Operating Instructions
![Sony DAV-TZ130 manual cover](/images/0675c2715fcaca43f6cffc0d/thumbs/thumb175x175.webp)
To connect your Sony DAV-TZ130 to a TV without HDMI, use the composite video cable. Connect the yellow plug to the video output of the DAV-TZ130 and the corresponding input on your TV. For audio, connect the red and white plugs to the audio output of the DAV-TZ130 and the corresponding inputs on your TV.
Ensure that the rear speakers are properly connected to the main unit. Check the speaker settings on the DAV-TZ130 to ensure that the surround sound mode is activated. Additionally, verify that the audio source is encoded with surround sound.
To reset the Sony DAV-TZ130 to factory settings, press and hold the "STOP" button on the unit for about 5 seconds until 'RESET' appears on the display. This will restore the original factory settings.
The Sony DAV-TZ130 does not support network-based firmware updates. Ensure you check the Sony support website for any available updates and instructions that may require a physical media update method.
Ensure the DVD is clean and free of scratches. Verify that the DVD format is compatible with the DAV-TZ130. If the issue persists, try another DVD to determine if the problem is with the disc or the player.
The Sony DAV-TZ130 does not have built-in Bluetooth capabilities. You may use an external Bluetooth adapter plugged into the AUX input if wireless connectivity is needed.
Use a DVD lens cleaning disc available at most electronics stores. Follow the instructions provided with the cleaning disc to clean the lens safely.
For optimal sound quality, place the front speakers equidistant from the TV and slightly angled toward the listening area. The center speaker should be directly above or below the TV. Place the rear speakers slightly behind the listening position, at ear level.
The 'PROTECT' message indicates a possible short circuit or speaker wire issue. Turn off the system and check all speaker connections for any exposed wires or shorts. Ensure all connections are secure and retry.
To enhance bass output, ensure the subwoofer is placed on the floor, preferably in a corner or against a wall, to amplify the bass effect. Adjust the bass settings on the unit to your preference.