Sony DAV-HDZ235 Operating Instructions
![Sony DAV-HDZ235 manual cover](/images/4bef8d6fd164e6cddfa8ca57/thumbs/thumb175x175.webp)
To connect your Sony DAV-HDZ235 to a TV, use an HDMI cable if your TV supports HDMI. Connect one end of the HDMI cable to the HDMI OUT jack on the system and the other end to the HDMI IN jack on your TV. If your TV does not support HDMI, use the component or composite video output connections.
First, ensure all speaker wires are connected properly. Check the speaker settings in the setup menu and make sure the volume is turned up. Also, verify that the correct input source is selected on the system.
To reset the system, turn off the main unit and hold down the STOP button and the VOLUME - button on the unit simultaneously for about five seconds. This will reset the system to factory settings.
No, the Sony DAV-HDZ235 is not compatible with Blu-ray discs. It is designed to play DVDs, CDs, and supported audio formats.
The Sony DAV-HDZ235 does not support firmware updates via USB or online. Ensure your device is functioning correctly and check for updates directly from Sony's support website if available.
Place the front speakers at ear level and equidistant from the TV. The center speaker should be directly above or below the TV. Position the surround speakers slightly behind the listening position and at ear level. The subwoofer should be placed on the floor for optimal bass response.
Check if the batteries in the remote control need replacement. Ensure there are no obstacles between the remote and the system. Try resetting the remote by removing the batteries and pressing all the buttons for a few seconds before reinserting the batteries.
To enhance bass output, adjust the subwoofer level in the audio settings menu and ensure the subwoofer is placed in a corner or against a wall for better bass response. Also, make sure the subwoofer is turned on and connected correctly.
The Sony DAV-HDZ235 does not support direct connection of wireless headsets. You can use a Bluetooth transmitter connected to the audio output to pair with a Bluetooth headset.
Audio delay can be due to processing time in the system or TV. Check the audio delay settings on both the DAV-HDZ235 and your TV, and adjust them to synchronize the audio with the video.