Sony DAV-HDX274 Operating Instructions
![Sony DAV-HDX274 manual cover](/images/8492ffea512a82f9662f922f/thumbs/thumb175x175.webp)
To reset the system, unplug the power cord and plug it back in after a few minutes. Then, press the 'POWER' button while holding down the 'STOP' button on the unit to reset to factory settings.
First, ensure the system is powered on. Press the 'EJECT' button on the remote or the unit. If it still does not open, check for any obstructions or attempt a system reset.
The system is designed for a specific speaker setup and may not support additional speakers. Refer to the manual for compatible speaker configurations.
Check the speaker connections and ensure the rear speaker wires are properly connected. Also, verify the surround sound settings on the unit are configured correctly.
Use a DVD lens cleaner disc available at electronics stores. Follow the instructions on the cleaner disc packaging for best results.
This indicates a possible short circuit or speaker issue. Check all speaker connections for shorts and ensure none of the wires are touching each other.
Extend and reposition the FM antenna for better reception. Placing the antenna near a window can sometimes improve signal quality.
This model does not typically support firmware updates. For any functionality issues, contact Sony support for assistance.
Keep the unit in a well-ventilated area, clean the exterior with a soft, dry cloth, and avoid exposure to liquids or excessive heat. Regularly check connections to ensure they are secure.
Place speakers at ear level and equidistant from the listening area. Use the built-in equalizer settings to adjust sound to your preference and ensure speakers are in phase.