Sony DAV-DZ170 Operating Instructions
![Sony DAV-DZ170 manual cover](/images/cd3ca7344c166c1cd9588f22/thumbs/thumb175x175.webp)
To connect your TV to the Sony DAV-DZ170, use an HDMI cable if your TV supports HDMI ARC (Audio Return Channel). Connect one end to the HDMI OUT jack on the DAV-DZ170 and the other to the HDMI ARC input on your TV. If your TV does not support HDMI ARC, use an optical digital cable.
First, ensure that all speaker cables are properly connected. Check if the volume is turned up and if the mute function is off. Verify that the correct input source is selected. If the issue persists, reset the system to its factory settings by pressing and holding the STOP and FUNCTION buttons on the unit.
The Sony DAV-DZ170 does not support firmware updates via USB or network. Typically, this model does not require firmware updates. Ensure you check the manual or Sony's support website for any specific updates or instructions for your device.
This could be due to the auto standby function, which turns off the system after a period of inactivity. Check if the auto standby setting is enabled and disable it if necessary. Additionally, ensure the unit is well-ventilated to prevent overheating.
To enhance bass output, ensure the subwoofer is properly connected and placed in an optimal position within the room. Adjust the sound settings on the unit to increase bass levels, and consider using the sound field settings like 'MOVIE' or 'MUSIC' for enhanced audio performance.
Unplug the system before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Avoid using any liquid cleaners or solvents. For the speaker grills, use a vacuum cleaner with a brush attachment to remove dust.
Connect the FM antenna to the FM 75 Ω COAXIAL jack. Press the FUNCTION button to select 'FM'. Use the TUNING +/- buttons to tune into your desired station. For presetting stations, press and hold the MEMORY button until the preset number flashes, then use the PRESET +/- buttons to select a preset number and press MEMORY again to store.
Check if the batteries are installed correctly and have sufficient power. Replace them if necessary. Ensure there are no obstacles between the remote and the unit. If the problem persists, reset the remote by removing the batteries and pressing all buttons twice before reinstalling the batteries.
To connect external devices like a gaming console or streaming box, use the Audio In jacks on the back of the unit. Connect the external device using an RCA cable. Select the appropriate input source on the DAV-DZ170 using the FUNCTION button.
The Sony DAV-DZ170 does not have built-in Bluetooth functionality. However, you can use a Bluetooth audio adapter connected to the Audio In jacks to stream audio from Bluetooth-enabled devices.