Sony D-EJ610 Operating Instructions
![Sony D-EJ610 manual cover](/images/33959efaf5233eea96ef93c9/thumbs/thumb175x175.webp)
To reset your Sony D-EJ610, disconnect the power source by removing the batteries and unplugging any adapters. Wait for about 30 seconds before reconnecting the power. This should reset the device.
Ensure that the batteries are correctly installed and are not depleted. If using an AC adapter, make sure it is properly connected. Also, try resetting the device as described in QA1.
Use a CD lens cleaning disc available at most electronics stores. Alternatively, gently clean the lens with a cotton swab lightly moistened with isopropyl alcohol.
Ensure the CD is clean and free of scratches. Check if the player is on a stable surface to avoid vibrations. If the problem persists, clean the lens as described in QA3.
Yes, you can use rechargeable batteries. Ensure they are NiMH type and are fully charged before use for optimal performance.
Store the CD player in a cool, dry place. Remove the batteries if it will not be used for an extended period to prevent leakage.
Use high-quality alkaline or fully charged NiMH rechargeable batteries. Turn off anti-skip protection if it's not needed, as it consumes more power.
Check if the disc is properly seated on the spindle. Inspect the spindle for any obstructions and ensure the disc is clean. If the problem persists, seek professional repair services.
Use a 3.5mm audio cable to connect the headphone jack of the player to the input of your external speakers. Ensure the volume is set to a safe level.
Check if the headphones are properly plugged in. Test the headphones with another device to ensure they are functional. Also, verify that the volume is turned up.