Sony CMT-EX200 Operating Instructions
![Sony CMT-EX200 manual cover](/images/a20b12862aeb27e01a367bc2/thumbs/thumb175x175.webp)
To set the clock on the Sony CMT-EX200, press the 'Clock/Timer Set' button on the remote control. Use the arrow keys to set the hour, then press 'Enter'. Repeat the process to set the minutes, then confirm by pressing 'Enter' again.
Check if the unit is properly connected to power and if the volume is turned up. Ensure that the mute function is not activated and verify that the speakers are properly connected.
Extend the FM lead antenna fully and adjust its position for better reception. Try placing the system near a window or away from electronic devices that may cause interference.
Ensure the CD is placed correctly in the tray with the label side up. Check for any scratches or dirt on the disc. Try cleaning the disc and the lens with a soft cloth.
To reset the unit, unplug it from the power source, then press and hold the 'Power' button for about 10 seconds. Reconnect the power and turn the system on. This should reset it to factory settings.
Yes, you can connect external audio devices using the AUX IN jack located on the back of the system. Use a standard stereo mini-plug cable to connect your device.
Use a soft, slightly damp cloth to clean the exterior of the system. Avoid using any chemical cleaners or abrasive materials that might damage the surface.
Insert the cassette into the cassette compartment with the exposed tape facing up and the side you want to play facing you. Gently push it into the compartment until it clicks into place.
Ensure that the sleep timer is not activated. Check the power connection and make sure the ventilation is not blocked, causing overheating.
Press the 'Clock/Timer Set' button, select the 'Timer' option, and set the desired start and stop times using the arrow keys. Confirm each selection with the 'Enter' button.