Sony CMT-EH15 Operating Instructions
![Sony CMT-EH15 manual cover](/images/433986acded2c390675c1abf/thumbs/thumb175x175.webp)
To set the clock on your Sony CMT-EH15, press and hold the CLOCK/TIMER SELECT button until "CLOCK" appears on the display. Then, use the TUNE + or - buttons to set the hour, and press ENTER. Repeat the process for minutes.
To improve radio reception, ensure the antenna is fully extended and positioned for optimal signal. For FM stations, adjust the FM lead antenna. If reception is still poor, try repositioning the unit or using an external antenna.
If the CD player won't read discs, check if the disc is clean and free of scratches. Try playing a different disc to rule out disc issues. If the problem persists, clean the laser lens with a lens cleaning disc.
To reset the Sony CMT-EH15, unplug the power cord from the outlet. Wait a few minutes, then plug it back in while holding the POWER button. This will reset the system to its factory settings.
To connect external devices, use the AUDIO IN jack located on the back of the unit. Connect the other end to the audio output of your external device using an appropriate audio cable. Select the AUDIO IN function to listen to the connected device.
If the Sony CMT-EH15 turns off automatically, it might be due to the sleep timer being activated. Check if the sleep timer is set by pressing the SLEEP button repeatedly until "SLEEP OFF" appears on the display.
To clean the speaker grills, gently wipe them with a soft, dry cloth. Avoid using any liquid cleaners or abrasive materials that could damage the surface.
No, the Sony CMT-EH15 does not support MP3 file playback. It is designed to play standard audio CDs and CD-R/RW discs with audio tracks.
To adjust the sound settings, use the BASS and TREBLE buttons on the remote control to increase or decrease the bass and treble levels according to your preference.
If there is no sound, check that the speakers are properly connected to the unit. Ensure the volume is turned up and not muted. Also, verify the correct function is selected and try different audio sources.