Sony CMT-EH10 Operating Instructions
![Sony CMT-EH10 manual cover](/images/e5cf3d4a5c10541dafd3641d/thumbs/thumb175x175.webp)
To set the clock, press the CLOCK/TIMER SET button, then use the TUNE +/– buttons to adjust the hour and minute. Press ENTER to confirm the time settings.
Ensure that the speakers are properly connected and the volume is turned up. Also, check if the MUTE function is activated.
Check if the CD is inserted correctly with the label side up. Ensure the CD is clean and not scratched. Try using another CD to test the player.
Extend the FM lead antenna fully and try positioning it for the best reception. Avoid placing the unit near electrical appliances that may cause interference.
Yes, you can connect external devices using the AUDIO IN jack on the back of the unit. Use an appropriate audio cable to connect your device.
Use a commercially available lens cleaner designed for audio CD players. Follow the instructions provided with the cleaner for best results.
Ensure the tape is not jammed and the cassette compartment is clean. If the problem persists, try another tape to determine if the issue is with the tape or the player.
To reset the system to factory settings, unplug the power cord, wait a few seconds, and then plug it back in while holding down the STOP button on the unit.
Check if the sleep timer is activated, which might cause the system to turn off. Also, ensure that there is sufficient ventilation around the unit to prevent overheating.
Press the CLOCK/TIMER SET button until the timer setting option appears. Use the TUNE +/– buttons to set the start time and select the desired music source. Press ENTER to confirm.