Sony CFD-ZW755 Operating Instructions
![Sony CFD-ZW755 manual cover](/images/b5ce7f4740a40196160626df/thumbs/thumb175x175.webp)
To set the clock, press and hold the CLOCK button until the hour starts flashing. Use the TUNING + or - buttons to set the hour, then press the CLOCK button again to set the minutes. Adjust the minutes in the same way and press CLOCK to finalize.
If the CD player is not reading discs, try cleaning the disc and the lens with a soft, dry cloth. Ensure the disc is inserted correctly and is not scratched or damaged. If the problem persists, there may be an issue with the laser assembly that requires professional servicing.
To improve radio reception, fully extend the telescopic antenna for FM stations and adjust its angle for optimal signal. For AM reception, try repositioning the unit itself as it uses an internal antenna. Avoid placing the unit near electronic devices that may cause interference.
No, the Sony CFD-ZW755 does not support USB playback. It plays music from CDs, cassettes, and radio.
The Sony CFD-ZW755 uses six 'D' size batteries for portable operation. Ensure the batteries are inserted correctly, observing the polarity indications.
To record from the radio, insert a blank cassette tape, tune to the desired radio station, and press the RECORD button while holding down the PLAY button on the cassette deck.
Check that the volume is turned up and that the mute function is not activated. Also, ensure the function selector is set to the correct mode (CD, Tape, or Radio). If using headphones, unplug them to allow sound through the speakers.
To clean the tape heads, use a cotton swab slightly moistened with isopropyl alcohol. Gently clean the heads and the pinch roller, avoiding excessive pressure. Allow the heads to dry completely before using the unit again.
The Sony CFD-ZW755 does not have a provision for connecting external speakers. It is designed to be a standalone unit with built-in speakers.
When not in use, store the Sony CFD-ZW755 in a cool, dry place. Remove the batteries to prevent leakage and keep the unit away from dust and direct sunlight. Cover it with a cloth to protect it from dirt and debris.