Sony CFD-W57 Operating Instructions
![Sony CFD-W57 manual cover](/images/c20fb14aa02a861d62f89555/thumbs/thumb175x175.webp)
To set the clock on your Sony CFD-W57, press and hold the CLOCK button until the hour starts flashing. Use the TUNING + or - buttons to adjust the hour, then press CLOCK again to set the minutes. Adjust the minutes using the TUNING buttons and press CLOCK once more to confirm.
If the cassette deck is not playing tapes properly, ensure the tape is not damaged or jammed. Clean the cassette heads with a suitable cleaning solution and a cotton swab. Also, check that the tape is inserted correctly and that the deck is free from dust and debris.
To improve radio reception, extend the antenna fully and adjust its position for the best signal. If indoors, try moving the unit closer to a window. Ensure that there are no electronic devices nearby that could cause interference.
If your CD is not playing, make sure it is inserted with the label side up. Check if the CD is free from scratches or dirt. Clean the CD lens with a suitable cleaning disc if necessary. Also, ensure that the CD format is compatible with the player.
The Sony CFD-W57 can be powered using the supplied AC power cord or by using six D-size batteries for portable use. Always ensure the correct polarity when inserting batteries.
To perform a factory reset, press and hold the STOP button and the TUNING MODE button simultaneously until the display shows 'RESET'. Release the buttons and the unit will return to its factory settings.
The Sony CFD-W57 does not have an option to connect external speakers. It is designed to use its built-in stereo speakers for audio output.
Distorted sound at high volume can be due to the speakers being overdriven. Reduce the volume to a lower level. Also, check if the source media (CD, tape, radio) is not distorted itself.
To clean the exterior, use a soft, dry cloth. Avoid using any chemicals or abrasive materials. If needed, slightly dampen the cloth with water to remove stubborn dirt, and immediately dry the surface afterwards.
If the unit won't turn on, check the power source. Ensure the AC cord is securely connected or the batteries are correctly installed and have sufficient charge. If using batteries, try replacing them with new ones.