Sony CFD-S500 Operating Instructions
![Sony CFD-S500 manual cover](/images/b184cc4a9c75706581127223/thumbs/thumb175x175.webp)
To set the clock, press and hold the 'Clock/Timer Set' button until the hour indicator begins to flash. Use the 'Tuning +/-' buttons to adjust the hour, then press 'Clock/Timer Set' again to set the minutes. Once done, press the button once more to confirm the time.
First, ensure the disc is inserted correctly, with the label side up. Check if the disc is clean and free from scratches. If the issue persists, try playing a different CD to determine if the problem is with the disc. If none of these steps work, consider cleaning the lens with a CD lens cleaner.
To improve radio reception, fully extend the antenna and try repositioning it. Additionally, move the unit closer to a window or away from electronic devices that may cause interference. Switching between mono and stereo modes can also help with reception quality.
The Sony CFD-S500 does not have dedicated output ports for external speakers. However, you can connect headphones or use a line-out cable to connect to an auxiliary input on another device.
The Sony CFD-S500 requires six size C batteries for portable use. Ensure that you insert the batteries with the correct polarity as indicated in the battery compartment.
To reset the Sony CFD-S500, unplug the unit from the power source and remove any batteries. Press and hold the 'Stop' button while reconnecting the power. Keep the button pressed until the display shows 'RESET'.
Check if the auto power-off feature is enabled, which turns off the device after a period of inactivity. Additionally, ensure the batteries are not depleted or, if using AC power, verify that the power connection is secure.
Use a soft, dry cloth to clean the exterior of the unit. Avoid using any chemical solvents or abrasive materials. For the CD lens, use a CD lens cleaner designed for optical lenses.
The Sony CFD-S500 supports standard audio CDs and CD-R/RW discs with MP3 files. Ensure that the MP3 files are recorded in a compatible format and that the disc is finalized properly.
To set the alarm, press and hold the 'Clock/Timer Set' button and adjust the time as needed using the 'Tuning +/-' buttons. Choose between CD, radio, or tape as the sound source. Finally, press 'Clock/Timer Set' to activate the timer.