Sony CFD-S28 Operating Instructions
![Sony CFD-S28 manual cover](/images/ba19fc3eaee0a082a9a12c35/thumbs/thumb175x175.webp)
To reset the Sony CFD-S28, disconnect the power cord from the AC outlet. Wait for a few minutes, then reconnect the power cord. This will reset the unit to its factory settings.
Ensure that the disc is inserted correctly with the label side up. Check for any dust or scratches on the disc and clean it if necessary. Also, try playing a different disc to determine if the problem is with the player or the disc itself.
Try repositioning the unit or extending the antenna to improve reception. Place the unit near a window or an area free from interference. Avoid placing the unit near other electronic devices that may cause interference.
Check if the cassette tape is inserted correctly. Ensure that the tape is not loose or tangled. Clean the tape heads and pinch rollers using a cotton swab moistened with a cleaning solution.
The Sony CFD-S28 does not have dedicated outputs for external speakers. It is designed to work with its built-in speakers only.
Press the 'Clock' button and use the tuning buttons to set the hour. Press 'Enter' to confirm, then use the tuning buttons to set the minutes. Press 'Enter' again to finalize the time setting.
Use a soft, dry cloth to clean the exterior of the unit. Avoid using any type of solvent, such as alcohol or benzine, as they may damage the finish. For the CD lens, use a commercially available lens cleaner if necessary.
Check if the volume is turned up and not muted. Ensure the headphones are not plugged in, as this will mute the speakers. Verify that the correct function (CD, Tape, Radio) is selected.
Open the battery compartment located at the back of the unit. Remove the old batteries and insert new ones, ensuring the correct polarity. Close the compartment securely.
The Sony CFD-S28 is compatible with standard audio cassette tapes. It can play and record on Type I (normal) and Type II (CrO2) tapes.