Sony CFD-S26 Operating Instructions
![Sony CFD-S26 manual cover](/images/91efb6e32dbf5f4e19846ef3/thumbs/thumb175x175.webp)
To set the clock on your Sony CFD-S26, press the 'Clock' button until the hour digits begin to flash. Use the 'Tuning/Time Set' buttons to adjust the hour. Press 'Clock' again to switch to minutes and adjust similarly. Finally, press 'Clock' once more to confirm the time.
Ensure the CD is inserted correctly, label side up, and clean from dust or scratches. Confirm that the CD format is compatible. If issues persist, try resetting the unit by unplugging it for a few minutes.
Extend the telescopic antenna fully and adjust its angle for the best reception. Avoid placing the unit near electronic devices that could cause interference. If available, switch between AM and FM bands for optimal reception.
To remove a stuck cassette tape, gently press the 'Stop/Eject' button. If it does not release, turn off the power and carefully open the cassette compartment. Ensure the tape is not tangled or damaged.
Yes, the CFD-S26 can be powered by 6 size C batteries. Ensure that the batteries are inserted correctly according to the polarity marks inside the compartment.
Use a CD lens cleaning disc to gently clean the lens. Avoid using any liquid cleaners or disassembling the unit as it may damage the lens.
Check if the volume is turned up and the 'Mute' function is not activated. Ensure the device is not in 'Pause' mode and that headphones are not plugged into the jack.
Tune to the desired station, then press and hold the 'Memory' button until the preset number flashes. Use the 'Tuning/Time Set' buttons to select a preset number and press 'Memory' again to save.
Regularly clean the exterior with a soft, dry cloth. Avoid using solvents or abrasive cleaners. Periodically check the battery compartment for corrosion and replace batteries when necessary.
To reset the CFD-S26, disconnect the power cord and remove any installed batteries. Wait for about 10 minutes before reconnecting the power to reset the system.