Sony CFD-G30 Operating Instructions
![Sony CFD-G30 manual cover](/images/69e79044e07cac1eac234a0b/thumbs/thumb175x175.webp)
To set the clock on your Sony CFD-G30, press the 'Clock' button and use the tuning buttons to adjust the hour and minute. Confirm by pressing 'Clock' again.
Ensure the CD is placed correctly with the label side up and check if the CD is clean and free from scratches. If issues persist, try a different CD to rule out disc problems.
The Sony CFD-G30 does not have Bluetooth connectivity. However, you can use an auxiliary cable to connect your smartphone to the AUX input.
To improve radio reception, extend the antenna fully and position it for the strongest signal. Avoid placing the unit near electronic devices that may cause interference.
Check if the cassette tape is inserted correctly. Clean the tape head using a tape head cleaner if necessary. Ensure the tape is not jammed or damaged.
To perform a factory reset, unplug the unit from the power source, wait for a few minutes, and then plug it back in. This will reset the system settings.
The Sony CFD-G30 requires six size C batteries for portable operation. Ensure they are inserted with the correct polarity as indicated in the battery compartment.
Check if the power cord is securely connected and if the outlet is functioning. If using batteries, ensure they are not depleted and are inserted correctly.
Use a soft, dry cloth to clean the exterior of the unit. Avoid using alcohol, benzine, or thinner as these may damage the surface.
Insert the cassette tape into the tape deck, ensuring it is properly aligned. Press the 'Play' button to start playback. Adjust volume as needed.