Sony CFD-E55 Operating Instructions
![Sony CFD-E55 manual cover](/images/193c601d2dfe1cd3b4b9b8b9/thumbs/thumb175x175.webp)
To set the clock, first ensure the unit is in standby mode. Press and hold the CLOCK button until the hour digits start flashing. Use the TUNING + or – buttons to set the hour, then press CLOCK again to set the minutes. Finally, press CLOCK to confirm the time.
If the CD player doesn't read discs, ensure the disc is clean and free of scratches. Try using a different disc. If the issue persists, clean the lens with a CD lens cleaner. If the problem continues, seek professional service assistance.
Improve radio reception by fully extending the telescopic antenna. For FM stations, adjust the antenna's direction for the best signal. For AM stations, reposition the entire unit for optimal reception. Avoid placing the device near electronics that may cause interference.
Yes, you can connect an external audio device using the AUX input. Use a suitable audio cable to connect your device to the AUX IN jack on the back of the unit. Select the AUX function by pressing the FUNCTION button.
To clean the cassette player heads, open the cassette compartment and gently clean the heads, capstans, and pinch rollers using a cotton swab moistened with isopropyl alcohol. Allow the parts to dry completely before using the cassette player again.
If the sound is distorted, check the speaker connections and ensure they are secure. Adjust the volume to a lower level. If using batteries, replace them with new ones. Also, verify that the unit is not placed near any devices causing interference.
To reset the unit to factory settings, disconnect the power cord and remove all batteries. Wait for a few minutes, then reconnect the power. This will reset the unit, erasing any stored settings.
If the unit won't power on, ensure it is connected to a working power outlet. If using batteries, confirm they are correctly inserted and have sufficient charge. Try replacing the batteries with new ones.
Yes, you can program tracks. While the CD is stopped, press PROGRAM. Use the TUNING + or – buttons to select a track, then press PROGRAM to confirm. Repeat to add more tracks. Press PLAY to start playback in the programmed order.
To replace the remote control batteries, open the battery compartment on the back of the remote by sliding the cover. Remove old batteries and insert new ones, ensuring the polarity (+/-) is correct. Replace the cover securely.