Sony CDX-45 65 Operating Instructions

To reset the Sony CDX-45 65 to factory settings, press and hold the reset button located on the front panel for about 5 seconds until the unit restarts.
Ensure the CD is clean and free from scratches. Try a different CD to see if the issue persists. If the problem continues, the lens may need cleaning or there may be a mechanical issue requiring professional repair.
Adjust the equalizer settings to match your preferences. Ensure all connections are secure and consider upgrading your speakers for better sound performance.
Check the fuse in the car's fuse box to ensure it’s not blown. If the fuse is intact, a wiring issue or internal fault may be present, requiring professional inspection.
The Sony CDX-45 65 does not support Bluetooth or USB connections, but you can use an auxiliary cable to connect your phone via the AUX input.
Press the 'Tuning' button on the unit, then use the 'Seek' or 'Manual' tuning buttons to adjust the frequency to your desired station.
This could be due to a malfunction or a problem with the CD mechanism. Try resetting the unit or check for obstructions within the CD slot.
Regularly clean the CD slot and controls with a dry cloth to prevent dust build-up. Avoid using harsh chemicals and ensure the device is not exposed to excessive moisture.
Press and hold the 'Select' button until the clock display flashes, then use the volume knob to set the hour and minutes. Press 'Select' again to save the settings.
Overheating can be caused by poor ventilation or excessive use at high volume levels. Ensure the unit is installed in a well-ventilated area and avoid prolonged use at maximum volume.