Sony CDP-CE545 Operating Instructions
![Sony CDP-CE545 manual cover](/images/dc71bb10cbd22175d3d4dce8/thumbs/thumb175x175.webp)
To change the playback mode on the Sony CDP-CE545, press the 'PLAY MODE' button on the front panel repeatedly to cycle through the options: Continuous, Shuffle, or Program.
First, ensure the player is plugged in and turned on. If the tray still won't open, try pressing the 'OPEN/CLOSE' button on the remote control. If it remains stuck, unplug the player, wait a minute, and plug it back in to reset the system.
No, the Sony CDP-CE545 is designed to play standard audio CDs and does not support MP3 or other compressed audio file formats.
To clean the lens, use a CD lens cleaning disc available from electronics stores. Avoid opening the player to clean the lens manually as this may void the warranty.
Check that the audio cables are properly connected to the stereo system. Ensure that the stereo is set to the correct input source and that the volume is turned up. Also, verify that the mute function is not activated.
Press the 'PROGRAM' button, then use the number buttons to select tracks in the desired order. Press 'PLAY' to start the programmed playback.
Store CDs in their cases to prevent scratches and keep them away from direct sunlight and heat sources to avoid warping.
To reset the CDP-CE545, turn off the player, then press and hold the 'STOP' button while turning the power back on.
Ensure the CD is clean and free of scratches. Check that the player is on a stable surface to prevent vibration. If the issue persists, the lens might need cleaning.
Use RCA audio cables to connect the 'LINE OUT' jacks on the CDP-CE545 to the CD or AUX input jacks on your amplifier.