Sony CDP-CE535 Operating Instructions
![Sony CDP-CE535 manual cover](/images/f6615eb37e1aaf3d1648ebf1/thumbs/thumb175x175.webp)
To connect the Sony CDP-CE535 to your audio receiver, use RCA audio cables. Connect the output jacks on the CD player to the input jacks on your receiver. Ensure the colors match: red for right audio and white for left audio.
If the CD tray on your Sony CDP-CE535 won't open, try turning the unit off and then back on. If the issue persists, check for any mechanical blockage or consider a reset. Refer to the user manual for reset instructions.
To clean the laser lens, use a CD lens cleaning disc available at electronics stores. Follow the instructions provided with the cleaning disc for best results. Avoid using manual cleaning methods as they may damage the lens.
If the CD skips, check for scratches or dirt on the CD. Clean the CD with a soft, lint-free cloth. Also, ensure that the CD player is on a stable surface to prevent vibrations.
No, the Sony CDP-CE535 is designed to play standard audio CDs and is not compatible with MP3 CDs.
To perform a factory reset, turn off the player and unplug it for a few minutes. Plug it back in and turn it on. This may reset certain settings to their defaults. Consult the manual for specific reset procedures if needed.
Regularly dust the exterior with a soft cloth. Keep the CD player in a dry, cool environment and avoid exposure to excessive moisture or heat. Use original CDs to reduce wear on the laser lens.
To program tracks, press the PROGRAM button, then use the skip/search buttons to select the desired track number. Press ENTER to confirm each track. Once all tracks are programmed, press PLAY to start playback.
Ensure the CDs are clean and free of significant scratches. The player might not recognize certain CD-Rs or CD-RWs due to format incompatibilities or poor disc quality. Try using commercially produced CDs.
No, the Sony CDP-CE535 does not offer the option to adjust playback speed. It plays audio CDs at the standard speed.