Snapper RLT140H331KV Series 1 Parts Manual
![Snapper RLT140H331KV Series 1 Tractor manual cover](/images/FMZUBmZhQsDvXlnbHaYbuuWA/thumbs/thumb175x175.webp)
The recommended oil type for the Snapper RLT140H331KV Series 1 Tractor is SAE 30 for temperatures above 32°F and SAE 5W-30 for temperatures below 32°F.
The air filter should be checked before each use and replaced if it appears dirty or damaged, typically every 25 hours of operation or annually, whichever comes first.
To winterize your tractor, clean the exterior, change the oil if needed, remove the battery and store it in a cool dry place, and add a fuel stabilizer to the tank.
Check the battery connections, ensure the fuel is fresh, inspect the spark plug for wear, and verify that the safety switches are engaged properly.
The recommended tire pressure for the front tires is 14 PSI and for the rear tires is 10 PSI.
To adjust the cutting height, locate the height adjustment lever on the tractor and move it to the desired position. Ensure both sides are set to the same height for an even cut.
At 50 hours, change the engine oil, check the air filter, inspect the blades, and lubricate all fittings.
To replace the mower blades, disconnect the spark plug, secure the mower, use a wrench to remove the blade bolts, replace with new blades, and tighten the bolts securely.
Check for debris lodged in the blades, ensure the blades are balanced and properly secured, and inspect the deck for damage.
Regularly sharpen the blades, ensure the deck is clean and clear of debris, maintain proper tire pressure, and adjust the cutting height appropriately.