Sennheiser RS 165 Instruction Manual
![Sennheiser RS 165 manual cover](/images/d12d5f92047c204cdf3501f5/thumbs/thumb175x175.webp)
To connect your Sennheiser RS 165 to your TV, use the provided audio cable to connect the transmitter to your TV's audio output. Ensure the transmitter is powered on and the headphones are properly charged.
If your RS 165 headphones are not charging, check the connection between the charging cable and the headphones. Ensure the cable is not damaged and that the power source is functioning. Try a different USB port or adapter if necessary.
To reset your Sennheiser RS 165 headphones, turn off the headphones, then press and hold the power button for about 10 seconds until you hear a beep or see an LED flash indicating a reset.
Ensure the transmitter is connected properly to the audio source and that both the transmitter and headphones are powered on. Check the volume level on the headphones and the audio source.
No, the Sennheiser RS 165 system does not support more than one pair of headphones per transmitter. Each transmitter is designed to connect to only one pair of headphones.
The effective wireless range of the Sennheiser RS 165 is up to 30 meters (98 feet) in optimal conditions without obstructions. The range may vary depending on the environment.
To adjust the bass on the RS 165 headphones, press the Bass Boost button on the right ear cup to toggle the bass enhancement feature on or off.
It takes approximately 8 hours to fully charge the RS 165 headphones from empty. Ensure the headphones are turned off while charging for the fastest charge time.
If the audio is distorted or has interference, try moving closer to the transmitter, or ensure there are no obstructions between the headphones and the transmitter. Also, check for other electronic devices that might be causing interference.
When the RS 165 headphones are fully charged, the LED indicator on the headphones will change from red to green, indicating a full charge.