Sencor SPT 231 Instruction Manual
![Sencor SPT 231 Boombox manual cover](/images/ZFawdfDQuxwWzHJadTlfkbDi/thumbs/thumb175x175.webp)
To connect a Bluetooth device to your Sencor SPT 231 Boombox, turn on the boombox and press the 'Mode' button until 'BT' is displayed. Activate Bluetooth on your device and select 'Sencor SPT 231' from the list of available devices.
Ensure the CD is clean and free from scratches. Open the CD compartment and clean the lens gently with a lens cleaner. If the issue persists, try a different CD to determine if the problem is with the disc or the player.
Extend the antenna fully and adjust its position for optimal reception. If indoors, try moving the boombox closer to a window. Avoid placing it near electronic devices that may cause interference.
Yes, you can play music from a USB drive. Insert the USB drive into the USB port and press the 'Mode' button until 'USB' is displayed. Use the play controls to navigate and play your music files.
Use a soft, dry cloth to gently wipe the exterior. Avoid using abrasive cleaners or solvents. For stubborn stains, a slightly damp cloth with mild soap can be used, but ensure no liquid enters the device.
Check the power cord for any signs of damage and ensure it is securely connected. Try a different power outlet. If using batteries, ensure they are correctly inserted and not depleted.
Press and hold the 'Time Set' button until the clock display blinks. Use the 'Skip' buttons to set the hours and minutes, then press 'Time Set' again to confirm the time.
Yes, the boombox has a headphone jack. Simply plug your headphones into the jack for private listening. Ensure the volume is at a comfortable level before use.
First, try resetting the boombox by unplugging it from the power source for a few minutes. If the problem persists, inspect for any physical blockage around the buttons. If necessary, consult the user manual for further troubleshooting steps.
Use the 'Mode' button to cycle through available audio sources such as CD, USB, Bluetooth, and radio. The current mode will be displayed on the screen.