Sencor SPT 228 BG Instruction Manual
![Sencor SPT 228 BG Boombox manual cover](/images/mkeXHJuyCHDSOuFJygtYzIXD/thumbs/thumb175x175.webp)
To connect your phone via Bluetooth, turn on the boombox and switch to Bluetooth mode. Ensure Bluetooth is enabled on your phone, search for available devices, and select 'Sencor SPT 228 BG' to pair.
First, check if the power cord is properly connected. If using batteries, ensure they are inserted correctly and are not depleted. If the issue persists, try a different power outlet or replace the batteries.
To improve radio reception, extend the telescopic antenna fully. Try repositioning the boombox near a window or higher location, and adjust the antenna angle for the best signal.
Yes, insert the USB stick into the USB port on the boombox. Use the function button to switch to USB mode and playback should start automatically.
The boombox supports playback of MP3 and WMA audio files from a USB stick. Ensure your files are in one of these formats for compatibility.
To clean your boombox, use a soft, dry cloth to wipe the exterior surfaces. Avoid using water or cleaning agents directly on the device to prevent damage.
Distorted sound at high volumes may be due to the speakers' power limit. Try reducing the volume or checking if the audio source itself is distorted.
To set a preset station, tune to the desired station, then press and hold the preset button until you hear a beep or the display confirms the preset is saved.
Yes, the boombox has a headphone jack. Plug in your headphones to listen privately. Ensure the volume is adjusted to a safe level before use.
The Sencor SPT 228 BG typically supports USB drives up to 32GB. For best performance, ensure the drive is formatted in FAT32.