Scion xB 2014 Quick Reference Guide
![Scion xB 2014 Hatchback manual cover](/images/NZLzHFIhMamHNODjiLeJcpoj/thumbs/thumb175x175.webp)
It is recommended to change the oil every 5,000 miles or 6 months, whichever comes first, to ensure optimal engine performance and longevity.
The 2014 Scion xB typically requires SAE 0W-20 synthetic oil for optimal performance and fuel efficiency.
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine, press the trip meter reset button, and hold it while turning the ignition off and back on. Continue holding until the maintenance light flashes and turns off.
The recommended tire pressure for the 2014 Scion xB is 33 psi for both front and rear tires. Check the sticker on the driver’s door jamb for confirmation.
To improve fuel economy, ensure regular maintenance, keep tires properly inflated, reduce excess weight, and drive smoothly by avoiding rapid acceleration and heavy braking.
If the check engine light illuminates, check for any obvious issues like a loose gas cap. If nothing is apparent, consider having a diagnostic scan done to identify the underlying issue.
To replace the cabin air filter, open the glove box, remove the dampener arm, and press in on the sides to drop the glove box. The cabin air filter is located behind a cover, which can be removed to access and replace the filter.
Some common issues include faulty window switches, minor oil leaks, and occasional transmission roughness. Regular maintenance and prompt repairs can mitigate these problems.
To jump-start, connect the positive cable to the positive terminal of the dead battery and then to the positive of the good battery. Connect the negative cable to the negative terminal of the good battery, and the other end to an unpainted metal surface on the engine block of the dead car. Start the working vehicle, then try starting your Scion xB.
Open the hood and locate the back of the headlight assembly. Remove the power connector and the rubber cover. Unclip the bulb holder and replace the bulb. Reassemble in reverse order, ensuring all connections are secure.