Scion xB 2012 Quick Reference Guide

It's recommended to change the oil every 5,000 to 7,500 miles, or every 6 months, whichever comes first, to ensure optimal engine performance.
The 2012 Scion xB typically requires 5W-20 or 0W-20 synthetic oil for the best performance and fuel efficiency.
To reset the maintenance light, turn the ignition switch to the 'ON' position, set the odometer to 'ODO' mode, turn the ignition off, hold the trip reset button, and turn the ignition back to 'ON' while holding the button until the light blinks and turns off.
The recommended tire pressure for the 2012 Scion xB is typically around 33 psi for both front and rear tires. Always check the owner's manual or the tire placard for precise measurements.
To replace the air filter, open the hood, locate the air filter housing, unclip the cover, remove the old filter, insert the new filter, and secure the housing back in place.
Common issues include electrical problems, transmission slipping, and excessive oil consumption. Regular maintenance and diagnostics with an OBD-II scanner can help identify and resolve these issues effectively.
To jump-start, connect the positive cable to the positive terminal of the dead battery, then to the donor battery. Connect the negative cable to the negative terminal of the donor battery and an unpainted metal surface on the xB. Start the donor vehicle, then the xB.
If the check engine light comes on, check for loose gas caps first. If the light remains, use an OBD-II scanner to diagnose the issue or consult with a professional mechanic.
Brake pads should be inspected every 10,000 miles and typically replaced every 25,000 to 70,000 miles, depending on driving conditions and habits.
The 2012 Scion xB is not designed for towing and does not have an official towing capacity. It is best to avoid using it for towing purposes.