Samsung DW80N3030US Installation Guide
![Samsung DW80N3030US Dishwasher manual cover](/images/OtvBvOIOVNiXZmoBVdfijYyK/thumbs/thumb175x175.webp)
To reset the Samsung DW80N3030US dishwasher, press and hold the Start/Reset button for about 3 seconds. This will cancel the current cycle and the dishwasher should reset.
Check the drain hose for kinks or clogs and ensure the garbage disposal cap is removed if connected. Also, clean the dishwasher's filter and drain pump.
Remove the lower rack, unlock the filter by turning it counterclockwise, and lift it out. Rinse the filter under running water and use a soft brush to remove debris before reinserting.
Ensure the door is fully closed and latched, the dishwasher is plugged in, and the circuit breaker is not tripped. Check for error codes on the display.
Place large items like pots and pans on the bottom rack, and small items like cups and glasses on the top rack. Avoid overcrowding to ensure proper water circulation.
Clean the dishwasher's filter and spray arms every month, and run a self-cleaning cycle with a dishwasher cleaner every 3-6 months.
The "LC" error code indicates a leak or moisture detected in the base. Inspect for leaks and ensure the dishwasher is level.
No, do not use regular dish soap as it can create excessive suds and potentially damage the dishwasher. Use only dishwasher detergent.
Open the rinse aid dispenser and turn the dial to adjust the amount of rinse aid dispensed. A higher number dispenses more rinse aid.
Ensure that the rinse aid dispenser is filled, use the correct drying cycle, and allow the dishes to cool before unloading.