Samsung DW60R2014US Installation Guide

To reset the Samsung DW60R2014US dishwasher, press and hold the Start/Reset button for three seconds. This will cancel the current cycle and reset the dishwasher.
If the dishwasher is not draining, check for clogs in the drain hose, filter, or garbage disposal. Ensure the drain hose is not kinked and the sink’s drain is clear.
Remove the lower rack to access the filter. Twist the filter counterclockwise to remove it, then rinse it under running water. Clean any debris from the area before reinserting the filter.
Run a cleaning cycle with a dishwasher cleaner or vinegar. Ensure the filter and drain are clean. Regularly leave the door slightly open to allow air circulation.
Use a rinse aid to enhance drying. Ensure dishes are loaded properly to allow air circulation. Select a cycle with a heat dry option if available.
Loud noises may result from items touching the spray arms. Ensure dishes and utensils are properly loaded and not obstructing the spray arms.
Yes, dishwasher tablets can be used. Make sure to place the tablet in the detergent dispenser and follow the manufacturer's instructions for optimal results.
The "OE" error code indicates a water overflow issue. Check for any blockages in the drain and ensure the inlet valve is functioning correctly.
Clean the dishwasher filter monthly. Run a cleaning cycle with a dishwasher cleaner or vinegar every 1-2 months for optimal performance.
Use high-quality, automatic dishwasher detergents. Avoid using hand-dishwashing liquids or detergents that produce excessive suds.