Samsung DW80J7550UG Installation Guide

To reset your Samsung DW80J7550UG dishwasher, press and hold the 'Start' button for three seconds. This will cancel the current cycle and reset the dishwasher.
First, check the drain hose for any clogs or kinks. Ensure the garbage disposal cap is removed if connected. Clean the filter and check for any obstructions in the drain pump.
Remove the lower rack and twist the filter counterclockwise to remove it. Rinse it under running water to remove debris and reinstall by twisting it clockwise.
Unusual noises can be caused by items that are improperly loaded. Ensure dishes are not touching each other and that the spray arms can spin freely.
Use the 'Heavy' cycle for heavily soiled dishes. This cycle uses higher temperatures and more powerful jets to clean tough stains effectively.
Open the rinse aid compartment by turning the cap counterclockwise. Adjust the dial to the desired level, with higher numbers releasing more rinse aid.
The 'Smart Auto' error indicates a problem with the water supply or a leak. Check the water inlet valve, hoses, and connections for any issues.
Ensure the rinse aid dispenser is filled, and use the 'Heated Dry' option. Also, slightly open the door after the cycle completes to let steam escape.
Regularly clean the filter, check and clean the spray arms, wipe down the door gasket, and run a cleaning cycle with a dishwasher cleaner monthly.
Ensure the door is fully closed and latched. Check the circuit breaker and power supply. Also, verify that the Delay Start function is not activated.