Samsung DW80H9970US Installation Guide
![Samsung DW80H9970US Dishwasher manual cover](/images/uEtieZxOTTmLXnIrnVixXQtA/thumbs/thumb175x175.webp)
To reset your Samsung DW80H9970US dishwasher, press and hold the Start button for three seconds. This will cancel the current cycle and reset the dishwasher.
Check the dishwasher's filter and drain hose for any blockages. Ensure that the drain hose is installed correctly and is not kinked. Clean the filter if necessary.
To clean the filter, remove the lower rack, twist the filter counterclockwise, and lift it out. Rinse the filter under warm water and use a soft brush to remove debris. Reinsert the filter by aligning it in place and twisting it clockwise.
Unusual noises can be caused by items inside the dishwasher touching each other or the spray arms. Check that dishes are loaded properly and ensure that nothing is obstructing the spray arms.
The 'LC' error code indicates a potential leak. Check the dishwasher's connections and hoses for any signs of water leakage and ensure they are properly secured.
Ensure that the rinse aid dispenser is filled, as it helps with drying. Additionally, select a cycle with a higher drying temperature or use the sanitize option if available.
Regular maintenance includes cleaning the filter, checking the spray arms for debris, wiping down the door seals, and running an empty cycle with a dishwasher cleaner to remove build-up.
To adjust the upper rack height, pull the rack out and locate the height-adjustable levers on each side. Push the levers upwards to raise the rack or downwards to lower it.
Spots can be caused by hard water. Ensure the rinse aid is filled to prevent spots. Consider using a dishwasher cleaner or water softener if the issue persists.
To set a delayed wash cycle, load the dishwasher, select the desired cycle, then press the 'Delay Start' button. Use the arrow keys to set the delay time and press Start to confirm.