Samsung DW80H9930US Installation Guide

To start a wash cycle, load the dishwasher, add detergent, close the door, select the desired cycle using the control panel, and press the Start button.
Check for clogs in the drain hose, garbage disposer, or air gap. Ensure the filter is clean and inspect the drain pump for obstructions.
It is recommended to clean the filter every month to ensure optimal performance and prevent clogs.
Inspect for items obstructing the spray arms, ensure dishes are properly loaded, and check for loose parts or debris in the pump area.
Ensure the door seal is intact and clean, check for overloading, and inspect the hoses and connections for damage or looseness.
Ensure that the spray arms can rotate freely, check the water inlet for adequate pressure, and verify that the detergent is not expired.
Place large items on the bottom rack and smaller items on the top rack. Ensure that dishes do not block the spray arms and avoid nesting.
To reset the dishwasher, turn off the power at the circuit breaker for 1-2 minutes, and then turn it back on.
Regularly clean the filter, check and clean the spray arms, inspect the door seal, and run a cleaning cycle with a dishwasher cleaner monthly.
Error codes indicate specific issues; refer to the user manual for code explanations and troubleshooting steps. Common issues include water supply, drainage, and door latch problems.