Samsung DW60M9990AP Installation Guide
![Samsung DW60M9990AP Dishwasher manual cover](/images/CttENWrZDOCtDvTvhgdAqItQ/thumbs/thumb175x175.webp)
To clean the filter, remove the lower rack and turn the filter counterclockwise to unlock it. Rinse it under running water to remove debris and reinstall by turning it clockwise until it locks.
Check for clogs in the filter and drain hose. Ensure the drain hose is not kinked and the sink drain is clear. If the issue persists, inspect the drain pump and consider contacting support.
To reset the dishwasher, press and hold the Start button for about 3 seconds until the display turns off. Release the button, then press it again to restart the unit.
Unusual noises might be caused by dishes touching each other or the spray arms. Ensure dishes are properly loaded and check that the spray arms can rotate freely.
Access the settings menu by pressing and holding the relevant buttons based on the manual. Adjust the water hardness level using the options provided. Consult the manual for specific button combinations.
Regularly clean the filter, check spray arms for blockages, clean the door seals with a damp cloth, and run a cleaning cycle with dishwasher cleaner to prevent buildup.
Inspect door seals for damage, check the water inlet and drain hoses for leaks, and ensure the dishwasher is level. If the problem continues, contact a service professional.
Error code "4C" indicates a water supply issue. Ensure the water supply valve is open, check the inlet hose for kinks or blockages, and verify water pressure is adequate.
Place larger items on the bottom rack and smaller, more delicate items on the top rack. Avoid blocking the spray arms and ensure items do not touch each other for better wash results.
Ensure dishes are loaded correctly, the spray arms are not blocked, and the filter is clean. Use the appropriate wash cycle for the load and check that the detergent is dispensed properly.