Rotax Renegade X mr 2019 Operator's Guide

The recommended break-in procedure includes keeping engine speed below 6000 RPM for the first 10 hours, avoiding full throttle starts, and varying the engine speed during operation.
Change the oil every 100 hours of operation or annually, whichever comes first. Always use the recommended oil grade and follow the manufacturer's guidelines.
Use a long-life ethylene glycol-based coolant that is pre-mixed with distilled water to a 50/50 ratio for optimal performance.
Check the battery connections, ensure the fuel system is not clogged, inspect spark plugs, and ensure the engine kill switch is in the 'run' position.
The recommended tire pressure for front tires is 5 psi and for rear tires is 5 psi. Always refer to the owner's manual for specific conditions.
Keep the battery terminals clean and tight, check the electrolyte level regularly, and store the battery fully charged in a cool, dry place when not in use.
Stop the vehicle immediately, allow the engine to cool, check the coolant level, and inspect the radiator for debris. Do not continue operation until the issue is resolved.
Remove the air filter, wash it with a mild soap and water solution, rinse thoroughly, allow it to dry completely, and re-oil it before reinstalling.
Clean the vehicle thoroughly, change the oil, add a fuel stabilizer, disconnect the battery, and store in a dry, covered area. Elevate the vehicle to prevent tire damage.
Maintain proper tire pressure, perform regular maintenance, use the recommended fuel type, and avoid aggressive driving habits to improve fuel efficiency.