Roberts Classiclite DAB 0 Troubleshooting Guide
![Roberts Classiclite DAB 0 manual cover](/images/e75628957bf39f612bbded6a/thumbs/thumb175x175.webp)
To perform a factory reset, press and hold the 'Select' button while turning on the radio. Keep holding the button until the display shows 'Factory Reset'. Release the button to confirm the reset.
To improve DAB reception, fully extend the antenna and adjust its position. Placing the radio near a window or away from electrical appliances can also help enhance signal strength.
Check if the radio is plugged into a working power outlet. If using batteries, ensure they are inserted correctly and have sufficient charge. If the issue persists, try using a different power source or replacing the batteries.
To set a preset, tune to the desired station, then press and hold the preset button (1-5) where you want to save the station until you hear a confirmation beep.
This issue may occur if the radio has been reset or if the signal reception is weak. Try rescanning for stations and ensure the antenna is properly adjusted.
Yes, you can use rechargeable batteries. Ensure they are NiMH type and fully charged before use. Note that the radio does not charge batteries internally.
To adjust the volume, use the rotary dial on the top or side of the radio. Turn it clockwise to increase the volume and counter-clockwise to decrease it.
'No Service' indicates that the radio cannot receive a signal. Try moving the radio to a different location, extending the antenna, and performing a full scan for stations.
To switch between DAB and FM modes, press the 'Mode' button on the radio until the desired mode is displayed on the screen.
Regularly check the antenna for damage and ensure it is fully extended for optimal performance. Clean the exterior with a soft, dry cloth and keep the radio away from moisture and dust.