Rangemaster T60 User Guide
![Rangemaster T60 manual cover](/images/ankDobURTqvFqfesdoQRoqEZ/thumbs/thumb175x175.webp)
To reset the Rangemaster T60 dishwasher, turn off the power by unplugging the unit or switching off the circuit breaker. Wait for about 10 minutes, then reconnect the power and turn the dishwasher back on.
First, check the drain hose for any kinks or blockages. Ensure that the sink drain is clear. Clean the dishwasher filter and check for obstructions in the pump area.
To clean the filter, remove the bottom dish rack, twist the cylindrical filter to unlock it, and lift it out. Rinse it under running water to remove debris, then replace it securely.
Spots on glasses can be caused by hard water. Ensure that the rinse aid dispenser is filled and consider using a water softener if necessary.
Check if the door is closed properly and latched. Ensure the power supply is on and check the circuit breaker. Verify that the child lock is not activated.
Clean the dishwasher interior, including the filter and spray arms, every month to ensure optimal performance and prevent odors.
Unusual noises can occur if items are improperly loaded. Ensure that dishes are not touching spray arms and that the dishwasher is level.
To improve drying, ensure that the rinse aid dispenser is filled and select a heated drying option if available. Open the door slightly after the cycle to allow steam to escape.
Refer to the user manual for a detailed explanation of error codes. Common codes include E1 for water supply issues and E4 for drainage problems.
No, regular dish soap creates excessive suds and should not be used in the dishwasher. Always use detergents specifically designed for dishwashers.