Rangemaster T45 User Guide
![Rangemaster T45 manual cover](/images/wGQCiTxSEFPmbXnRjIyDukOI/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select the desired wash program using the control panel, and press the start button.
Check for any blockages in the filter, drain hose, or sink trap. Clean them if necessary. Also, ensure that the drain hose is properly installed.
It is recommended to clean the filters once a month to ensure optimal performance and to prevent clogs.
Residue can be caused by overloading, using too much detergent, or hard water. Try reducing the load, adjusting detergent amount, or using a rinse aid.
Place larger items along the sides and back, smaller items in the front, and ensure that all items are angled downwards and do not block the spray arms.
To reset the dishwasher, press and hold the start button for about 3 seconds until the display shows a reset message or the lights blink.
Ensure the water supply is turned on, check the inlet hose for kinks, and inspect the inlet valve for any blockages.
Use a rinse aid, select a longer drying cycle, and ensure that the dishwasher is not overloaded, allowing better air circulation.
Regularly clean the filters, check and clean the spray arms, wipe the door seals, and inspect the drain hose for blockages.
Unusual noises can be due to items touching the spray arms, loose items in the dishwasher, or the dishwasher not being level. Check these areas to resolve the issue.