Rangemaster SXS Deluxe RSXSDL21 Black Chrome User Guide
![Rangemaster SXS Deluxe RSXSDL21 Black Chrome manual cover](/images/ZOvufAARVWfPcFaKegtfHqMD/thumbs/thumb175x175.webp)
To change the water filter, first locate the filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks in place. Run water through the dispenser for 5 minutes to clear any air.
Ensure that the refrigerator is plugged in and the temperature settings are correct. Check if the door seals are clean and intact. If the problem persists, clean the condenser coils and ensure there is adequate ventilation around the unit.
To defrost the freezer, remove all food items and unplug the refrigerator. Leave the freezer door open to allow the ice to melt. Use towels to soak up any water. Once defrosted, clean the interior and plug the unit back in.
The recommended temperature setting for the refrigerator is between 3°C and 5°C, and for the freezer, it is -18°C. Adjust the settings using the control panel to maintain optimal freshness.
Check if the ice maker is turned on and the water supply line is connected. Ensure the freezer temperature is set to the correct level. If there is no ice production, inspect the ice maker for jams and clear any obstructions.
Regular maintenance includes cleaning the condenser coils every six months, checking and cleaning door seals, replacing the water filter every six months, and inspecting the interior for any spills or debris.
To reset the control panel, unplug the refrigerator from the power outlet, wait for about 5 minutes, and then plug it back in. The control panel should reset and function normally.
Unusual noises may be due to the refrigerator being unbalanced, items inside vibrating, or the compressor running. Ensure the unit is level, rearrange items to prevent vibration, and check that the refrigerator is not touching any walls or cabinets.
To activate the child lock, press and hold the lock button on the control panel for 3 seconds until the lock icon appears. This will prevent any accidental changes to the settings.
First, check if the refrigerator is properly plugged in. If the light is still not functioning, replace the bulb with a new one of the same type and wattage. If the problem persists, contact customer support for further assistance.