Rangemaster Infusion 90 INFHDS90BL User Guide
![Rangemaster Infusion 90 INFHDS90BL manual cover](/images/hckMdDVZYVoEiWTLacAlrCrs/thumbs/thumb175x175.webp)
To install the Rangemaster Infusion 90 Hood, follow the installation guide provided in the manual. Ensure the hood is securely mounted to a stable surface and connected to the appropriate power supply. It's advised to seek professional installation to comply with safety standards.
Check if the hood is properly connected to the power supply. Inspect the light bulbs to ensure they are not burnt out. If the issue persists, consult a qualified technician as there may be an electrical fault.
Regularly clean the filters to prevent grease buildup and ensure efficient airflow. Wipe down the exterior with a damp cloth and mild detergent. Check and replace the charcoal filters every 3 to 6 months if used in recirculation mode.
The metal grease filters can be cleaned in a dishwasher or by soaking them in warm, soapy water. Ensure they are completely dry before re-installing them in the hood to prevent moisture-related issues.
Excessive noise can be due to clogged filters or an obstruction in the ductwork. Clean the filters and inspect the duct for any blockages. If the problem persists, it might indicate a mechanical issue that requires professional assistance.
Ensure the hood is switched off and cool. Carefully remove the bulb cover and replace the bulbs with the same type and wattage. Follow the instructions in the manual for specific bulb types and replacement procedures.
Check that the filters are clean and not obstructed. Verify that the ducting is correctly installed and free from blockages. Additionally, ensure the fan speed is set appropriately for cooking conditions.
Yes, the Rangemaster Infusion 90 Hood is designed to operate in both modes. Ensure that the appropriate filters are installed for the selected mode: ducting for extraction and charcoal filters for recirculation.
Charcoal filters should be replaced every 3 to 6 months depending on the frequency of use and cooking habits. Regular replacement is essential for maintaining air quality in recirculation mode.
First, ensure the hood is connected to the power supply. If the control panel is still unresponsive, reset the hood by turning off the power for a few minutes. If the issue remains, contact customer support for further assistance.