Rangemaster Elise 90 Induction Slate Brushed Nickel User Guide
![Rangemaster Elise 90 Induction Slate Brushed Nickel manual cover](/images/qxCnvBpLukNXqXdbXTiMhpdI/thumbs/thumb175x175.webp)
To clean the Rangemaster Elise 90 Induction Cooker, use a soft cloth and a mild detergent. Avoid abrasive cleaners or scouring pads as they can damage the surface. For the induction hob, use a hob cleaner and follow the manufacturer's instructions.
Ensure that the cookware is suitable for induction cooking and properly centered on the hob. Check that the hob is set to the correct power level. If the problem persists, consult the manual for troubleshooting steps or contact customer support.
To lock the controls, press and hold the key lock button for a few seconds until the lock symbol appears on the display. This will prevent accidental changes to the settings. To unlock, repeat the process.
Regularly clean the oven cavity and door seals. Check and replace the water filter periodically if your model includes one. Ensure the vents are not obstructed and perform a self-cleaning cycle if available.
Preheating time can vary based on ambient temperature, the selected cooking mode, and the oven's maintenance state. Ensure the door seal is intact and the oven is clean. If the issue persists, it may require a professional assessment.
Press the timer button, set the desired delay time using the control knob, and then select the cooking function and temperature. The oven will automatically start after the set delay.
Yes, cast iron cookware is suitable for induction hobs. Ensure the base is flat and smooth to prevent scratching the hob surface.
First, check if the bulb needs replacement. Make sure the oven is turned off and cool before attempting to change the bulb. If replacing the bulb does not solve the issue, consult the manual or contact a technician.
Use cookware with smooth, flat bases and avoid sliding pots across the hob. Clean the hob regularly to remove any debris that might scratch the surface.
The Rangemaster Elise 90 Induction Cooker requires a dedicated electrical circuit. Refer to the user manual for specific voltage and amperage requirements, and ensure installation is carried out by a qualified electrician.