Rangemaster ECL90HPNGFBL User Guide

To clean the Rangemaster ECL90HPNGFBL hob, ensure the appliance is cool. Use a soft cloth with mild detergent and water. Avoid abrasive cleaners and scourers. Rinse with a damp cloth and dry thoroughly.
If a burner won't ignite, check if the hob is connected to a power source. Ensure the burner caps are properly positioned. Clean the igniter and burner holes to remove any blockages.
Use cookware with a flat base and appropriate size for the burner. Adjust the flame to match the size of the pan and avoid using high heat unnecessarily.
Wipe the stainless steel surface with a damp cloth and dry with a soft towel. Use a stainless steel cleaner periodically to maintain the finish. Avoid using harsh chemicals.
If you smell gas, ensure all burners are turned off. Check for any gas leaks or loose connections. If the smell persists, contact a qualified technician immediately.
To turn off the gas supply to the hob, locate the gas supply valve, usually found in the cupboard under the hob, and turn it to the off position.
Yes, you can use cast iron cookware on the hob. Ensure the cookware has a smooth base to prevent scratching the hob surface.
If the controls are stiff, clean them with a damp cloth and ensure no food debris is obstructing them. If the issue persists, lubrication may be needed, or contact a technician for service.
Adjust the flame using the control knobs. Turn the knob to the left for a lower flame and to the right for a higher flame. Ensure the flame is blue and stable.
Yes, clicking noises are normal when igniting the burners. Continuous clicking may indicate the burner is not lighting properly or the igniter is dirty.