Ram Promaster City 2016 Owner's Manual
![Ram Promaster City 2016 Van manual cover](/images/RKKorTZSwHqBmDiyNwjjJBxy/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition switch to the "ON" position without starting the engine. Press the gas pedal slowly three times within 10 seconds. Turn the ignition off, then start the engine to ensure the light has been reset.
The recommended tire pressure for the 2016 Ram ProMaster City is 36 psi for both front and rear tires. Always check the tire information placard located on the driver's side door jamb for confirmation.
To improve fuel efficiency, ensure regular maintenance like timely oil changes, keep tires properly inflated, remove unnecessary weight, and drive at steady speeds. Avoid excessive idling and use cruise control when appropriate.
The 2016 Ram ProMaster City is recommended to use SAE 5W-20 engine oil. Always check the owner's manual for the most accurate information and ensure the oil meets the Chrysler MS-6395 specification.
If the check engine light is on, first ensure the gas cap is tightened properly. If the light persists, use an OBD-II scanner to check for error codes. Consult a professional mechanic if necessary to diagnose and fix the issue.
To replace the air filter, locate the air filter box in the engine compartment. Unclip or unscrew the air box cover, remove the old filter, and insert a new air filter. Ensure the cover is securely fastened before closing the hood.
Common issues include transmission problems and electrical issues. Regular maintenance and software updates can mitigate these problems. For persistent issues, consult a certified technician for thorough diagnostics and repairs.
Brakes should be inspected every 12,000 miles or once a year, whichever comes first. However, if you notice any unusual noises or reduced braking performance, have them inspected immediately.
The towing capacity of the 2016 Ram ProMaster City is up to 2,000 pounds. Always ensure the load is properly balanced and secured, and do not exceed the manufacturer's recommended limits.
To pair your phone, enable Bluetooth on your device. On the van's Uconnect system, select 'Phone' > 'Settings' > 'Add Device'. Follow the prompts to connect your phone, ensuring the passkey matches on both devices.