Ram 1500 DT 2020 Owner's Manual
![Ram 1500 DT 2020 Truck manual cover](/images/TNHuyTucYqBDlAHqyrVCCyHo/thumbs/thumb175x175.webp)
The recommended oil type for the Ram 1500 DT 2020 is SAE 5W-20 for 3.6L engines and SAE 0W-40 for 5.7L engines. Always check the owner's manual for the most accurate information.
To reset the oil change light, turn the ignition to the 'On/Run' position (without starting the engine), fully depress the accelerator pedal slowly three times within 10 seconds, and turn the ignition off.
The towing capacity of the Ram 1500 DT 2020 varies depending on the engine and configuration, with a maximum capacity of up to 12,750 pounds when properly equipped.
To improve fuel efficiency, maintain proper tire pressure, use recommended oil, reduce excess weight, and drive at steady speeds. Regular maintenance is also crucial.
The Ram 1500 DT 2020 typically uses a Group 94R battery. Always confirm with the vehicle specifications or owner's manual for the exact type.
To pair your phone, turn on Bluetooth on your phone, go to the Uconnect system, select 'Phone' > 'Pairing' > 'Add Device', and follow the prompts to complete the pairing process.
The recommended tire pressure for the Ram 1500 DT 2020 is typically 36 PSI for both front and rear tires. Check the placard on the driver's side door jamb for specific information.
It is recommended to check the air filter every 15,000 to 30,000 miles, but driving conditions may necessitate more frequent changes. Consult the owner's manual for guidance.
Common issues may include transmission shifts and electrical problems. Regular maintenance and software updates often resolve these issues. Consult a professional mechanic for persistent problems.
To change a flat tire, secure the vehicle, lift it using the jack, remove the lug nuts, replace the tire, tighten the lug nuts, and lower the vehicle. Refer to the owner's manual for detailed instructions.