Ram Chassis Cab 2022 Owner's Manual
![Ram Chassis Cab 2022 Truck manual cover](/images/nrsybOmtaRJcjltSucpMvXqy/thumbs/thumb175x175.webp)
For optimal performance, follow the maintenance schedule outlined in the owner's manual. Generally, oil changes should be every 8,000 miles, tire rotations every 10,000 miles, and a comprehensive check-up every 20,000 miles.
Start by checking the battery connections and charge. Ensure the fuel tank isn’t empty. If these are fine, check the starter motor and ignition system. Consulting the service manual for diagnostic codes can also help.
The 2022 Ram Chassis Cab has a towing capacity of up to 35,220 pounds, depending on the configuration and equipment. Always refer to the towing guide for specific details.
Turn the ignition to the "ON" position without starting the engine. Fully depress the accelerator pedal slowly three times within 10 seconds. Turn the ignition off and then start the engine to verify the reset.
Depending on the engine type, the 2022 Ram Chassis Cab may require regular unleaded gasoline or diesel fuel. Always refer to the fuel requirements in your owner's manual.
Activate Bluetooth on your smartphone. On the Uconnect system, select "Phone" > "Add Device." Follow the prompts and confirm the pairing code on both the phone and the Uconnect screen.
Ensure your gas cap is tightened securely. If the light remains on, check for other warning lights and consult the vehicle’s diagnostic system. It may be necessary to visit a certified technician for a detailed inspection.
Maintain proper tire pressure, follow the recommended maintenance schedule, use cruise control on highways, and avoid carrying unnecessary weight. Efficient driving habits such as gradual acceleration can also help.
Open the hood and locate the air filter housing. Release the clips or screws securing the cover, remove the old filter, and insert the new one, ensuring it’s seated correctly. Secure the cover back in place.
Most models feature a shift-on-the-fly system. Ensure the vehicle is in neutral and moving at a low speed, then use the 4WD selector switch on the dashboard to engage the desired 4WD mode.